Data code during recording
The recording date, time and condition are recorded automatically on the recording media.
They are not displayed during recording. However, you can check them as [DATA CODE]
during playback. To display them, select
[PLAYBACK] category) a desired setting
SET] (under
Shooting photos
In the default setting, photos are recorded on the following recording media.
DCR-SX20: Memory card
DCR-SR20: Internal hard disk
Tips
See page 17 on changing the recording media (DCR-SR20).
Press MODE until the
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.
(Photo): When
shooting a photo
(MENU) [Show others] [PLAYBACK
(Photo) icon appears.
.
US
23