Sony Handycam DCR-SR20 Handbook page 15

If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.
5
Select [NEXT] with  of the multi-selector, then press the center of the
multi-selector.
6
Set the date and time by repeating the procedure bellow.
 Highlight the desired item with / of the multi-selector.
 Select the setting value with / of the multi selector, and press the center of the
multi-selector.
7
Select [NEXT] 
of the multi-selector.
The clock starts.

Notes
The date and time do not appear during recording, but they are automatically recorded on the recording

media, and can be displayed during playback. To display the date and time, select
[Show others]  [PLAYBACK SET] (under
TIME]  
You can turn off the operation beeps by selecting

[GENERAL SET] category)  [BEEP]  [OFF] 
SET] (under
To turn off the power
Close the LCD screen. The POWER lamp flashes for a few seconds and the power is turned
off.
with  of the multi-selector, then press the center
[PLAYBACK] category)  [DATA CODE]  [DATE/

.
(MENU)  [Show others]  [SOUND/DISP

(MENU) 

.
US
15