Setting Up An Ethernet Network - Gateway E4350 User Manual

Chapter 7: Networking Your Computer
6
Click the
General
7
Click
Obtain an IP address automatically
8
Click to close the Internet Protocol (TCP/IP) Properties dialog box.
OK
9
Click to close the Local Area Connection Properties dialog box.
OK
10
Click to close the Network Connections window.
X
11
Repeat this procedure for every computer on your network.

Setting up an Ethernet network

We recommend using category 5, unshielded, twisted-pair cable (approximately 1/4" in
diameter with a thin outer-jacket, containing eight color-coded wires), and equipment
compatible with this type of cable. This type of cable is equipped with RJ-45 connectors
(like a large telephone jack connector, but with eight pins) on each end.
78
tab.
www.gateway.com
.