Gateway E-4400 System Manual page 96

Error Message
Not enough memory.
Print queue is full.
Printer is out of paper.
Required parameter
missing.
Syntax error.
Time and date not set.
Write protect error.
Solutions
Close all programs that are not currently in
use.
Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Add paper to the printer.
Make sure the printer is online.
Make sure you entered the right command. If
you are trying to exit MS-DOS to return to
Windows, type exit and press
Make sure you entered the right command.If
you are trying to exit MS-DOS to return to
exit
Windows, type , then press E
Enter the BIOS Setup utility to set the system's
date and time.
Move the write-protection tab over the hole on
the back of the diskette.
.
ENTER
.
NTER
Error messages
89