Closed Caption; Lamp Power; Remote Control; Security - Panasonic PT-VW430U Operating Instructions Manual

Operating manual (english)
Hide thumbs Also See for PT-VW430U:
Table of Contents

Advertisement

Setting

Closed caption

[Only for NTSC, 480i input]
1 )
Press ▲▼ to select [Closed caption].
2 )
Press ► or the <ENTER> button to
enter the submenu.

Closed caption

J
1 )
Press ▲▼ to select [Closed caption]
and then press the <ENTER> button.
2 )
Press ▲▼ to select [Off], [CC1], [CC2],
[CC3] or [CC4].
Color
J
1 )
Press ▲▼ to select [Color] and then
press the <ENTER> button.
2 )
Press▲▼ to select [color] or [white].
Attention
The closed caption is mainly used in the north America.
z
This function shows the text information contained in the
image signal. Captions may not be displayed on some
devices or software.
You can select [Closed caption] when [NTSC] or [480i]
z
signals are input.
Part of characters may not displayed when high
z
compensation values are set in [Keystone].
Closed captions are not displayed while the menu screen
z
appears.

Lamp power

This function allows you to change brightness of the
screen.
1 )
Press ▲▼ to select [Lamp power] and
then press the <ENTER> button .
2 )
Press ▲▼ to select one among the
modes as below.
You can also press the <LAMP> button to
z
display [Lamp power].
Normal Normal brightness.
Eco
56
- ENGLISH
Lower brightness reduces the
lamp power consumption and
extends the lamp life.

Remote control

This switching function prevents remote control
interference when operating several projectors or
video equipment at the same time.
1 )
Press ▲▼ to select [Remote control].
2 )
Press ► or the <ENTER> button.
3 )
Press ▲▼ to select one among the
seven codes.
This projector provides 7 different remote
z
control codes: [ALL], [Code 1]~[Code 6].
Attention
When operating the projector under [ALL] code, you can
z
operate several projectors at the same time. If you want
to operate the projector independently, you must switch
to other code.
When different codes are set on the projector and on the
z
remote control, any operation cannot be made. In that
case, switch the code on the remote control to fit the
code on the projector.
If the batteries are removed from the remote control for a
z
long period of time, the remote control code will be reset.

Security

This function allows you to use the Key lock and PIN
code lock function to set the security for the projector
operation.
1 )
Press ▲▼ to select [Security].
2 )
Press ► or the <ENTER> button to
access the submenu.
Key lock
J
This function locks the control panel and remote
control buttons to prevent operation by unauthorized
persons.
1 )
Press ▲▼ to select the desired items
as below.
Unlocked.
Lock the operation of the control
panel. To unlock, use the remote
control.
Lock the operation of the remote
control. To unlock, use the control
panel.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vw430ePt-vx500ePt-vx500uPt-vx501u

Table of Contents