Computer Operation; Accessing From The Web Browser - Panasonic PT-VW430U Operating Instructions Manual

Network

Computer operation

Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
1 ) Turn on the computer.
2 ) Make the network setting according to your system administrator.
If the projector settings are the default settings (See page 61), the computer can be used with the
following network settings.
DHCP
IP address
Subnet mask
Default gateway
DNS1/DNS2

Accessing from the Web browser

1 ) Activate the Web browser in the personal computer.
2 ) Enter the IP address set by the projector into the URL input field of the Web browser.
3 ) Enter your "User name" and "Password".
The factory default settings are user1 (user privileges)
z
or admin1 (administrator privileges) for the use name
and panasonic (lowercase letters) for the password.
4 ) Click [OK] to display the Projector
status page.
"Projector status" page is displayed.
z
Note
Avoid activating two or more Web browser simultaneously to work out setting or control actions.
z
Change the password first of all.
z
Administrator privileges enable the use of all functions. User privileges enable the use of only "Projector status",
z
"Network status", "Basic control", and "Change password".
If you want to control the projector using a Web browser, set [Network control] in the network menu to [On].
z
There are some control items used with the JavaScript function in the setting pages. If the web browser is set
z
not to use this JavaScript function, it may not control the projector properly.
64
- ENGLISH
Off
192.168.10.101
255.255.255.0
192.168.10.1
NONE