Kyocera FS-1128MFP Service Manual page 94

2JN
Maintenance
item No.
Setting the software switches
U699
Description
Sets the software switches on the FAX PWB individually.
Purpose
To change the setting when a problem such as split output of received originals occurs.
Since the communication performance is largely affected, normally this setting need not be changed.
Method
1. Press the start key.
2. Press [SW No.].
3. Enter the desired software switch number (3 digits) using the numeric keys and press the enter key.
4. Use numeric keys 7 to 0 to switch each bit between 0 and 1.
5. Press the start key to set the value.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
List of Software Switches of Which the Setting Can Be Changed
<System setting>
No.
39
<Communication control procedure>
No.
31
36
37
38
41
42
43
1-3-66
Bit Item
21 Declaration of reception size in automatic paper source selection for fax
Bit Item
2 Automatic reception level adjustment (V. 17)
1 Automatic reception level adjustment (V. 29)
0 Automatic reception level adjustment (V. 27ter)
7654 Coding format in transmission
3210 Coding format in reception
5 33600 bps/V34
4 31200 bps/V34
3 28800 bps/V34
2 26400 bps/V34
1 24000 bps/V34
0 21600 bps/V34
7 19200 bps/V34
6 16800 bps/V34
5 14400 bps/V34
4 12000 bps/V34
3 9600 bps/V34
2 7200 bps/V34
1 4800 bps/V34
0 2400 bps/V34
3 FSK detection in V.8
2 FIF length in transmission of more than 4 times of DIS/DTC signal
0 Automatic reception level adjustment (V. 33)
76543210 Adjustment width in automatic reception level adjustment
Description