Kyocera FS-1128MFP Service Manual page 53

Maintenance
item No.
Adjusting the DP center line
U072
Description
Adjusts the scanning start position for the DP original.
Purpose
Make the adjustment if there is a regular error between the centers of the original and the copy image when
the DP is used.
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
Display
FRONT
BACK
ROTATE
3. Press the system menu/counter key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu/counter key.
6. Change the setting value using the cursor left/right keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
7. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U072
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Center line (first page)
Center line (second page)
Center line (rotate copying)
Reference
Original
U404
(P.1-3-43)
Description
Setting
range
-39 to 39
-39 to 39
-39 to 39
Copy Copy
example 1 example 2
Figure 1-3-12
Initial Change in
setting value per step
0 0.085 mm
0 0.085 mm
0 0.085 mm
1-3-25
2JN