Kyocera FS-1128MFP Service Manual page 137

Problem
(12)A paper jam in A piece of paper torn from
the paper feed/con- paper is caught around reg-
veying section or istration sensor or exit sen-
fuser section is indi- sor.
cated when the main
Defective registration sen-
power switch is
sor on the high voltage
turned on.
PWB.
Defective exit sensor.
(13)Attention indica- Defective interlock switch
tor is lit when the on the power source PWB.
front cover is closed.
(14)When the trou-
ble occurs in the DP.
Causes
Check and remove if any.
Replace the high voltage PWB (See page 1-5-45).
Replace the exit sensor.
Check for continuity across the interlock switch. If there is no con-
tinuity when the interlock switch is on, replace the power source
PWB (See page 1-5-42).
Refer to the DP's service manual.
Check procedures/corrective measures
2JN
1-4-19