Table of Contents
Advertisement
To replace the system board:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
on page
4.
2
Disconnect the notebook from the optional port replicator by following
the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the main and optional secondary batteries by following the
instructions in
5
Remove the modular drives.
6
Remove the memory modules by following the instructions in
replacing memory modules" on page
7
If the notebook has IEEE 802.11 wireless networking built in, remove the
IEEE 802.11 Mini PCI module by following the instructions in
the IEEE 802.11 Mini PCI card" on page
8
Remove the hard drive kit by following the instructions in
hard drive kit" on page
9
Turn the notebook over so the top is facing up.
10
Remove the keyboard cover by following the instructions in
the keyboard cover" on page
11
Remove the keyboard by following the instructions in
keyboard" on page
12
Remove the hinge covers by following the instructions in
hinge covers" on page
13
Remove the LCD panel by following the instructions in
LCD panel assembly" on page
14
Remove the palm rest assembly by following the instructions in
the palm rest assembly" on page
15
Remove the cooling assembly by following the instructions in
the cooling assembly" on page
16
Remove the LED indicator panel by following the instructions in
"Replacing the LED indicator panel" on page
"Disconnecting from the port replicator" on page
"Removing the batteries" on page
21.
28.
31.
37.
39.
46.
53.
www.gateway.com
Replacing the system board
"Preparing your work space"
8.
11.
15.
"Replacing the
"Replacing the
57.
7.
"Adding or
"Replacing
"Replacing the
"Replacing
"Replacing the
"Replacing
"Replacing
85
Advertisement
Table of Contents
