Replacing Gateway 600YG2 Components
To add or replace memory modules:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
on page
2
Disconnect the notebook from the optional port replicator by following
the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the main and optional secondary batteries by following the
instructions in
5
Loosen the captive screw that secures the memory cover. (The screw cannot
be removed.)
6
Lift the screw side of the cover upward, then slide the cover out.
12
4.
"Disconnecting from the port replicator" on page
"Removing the batteries" on page
www.gateway.com
"Preparing your work space"
8.
7.