Advertisement
AUTO-SPINDLE LOCK
Your cordless drill has an auto-spindle lock. This feature
makes installing and removing bits much easier. When the
switch trigger is released and the motor comes to a
complete stop, you may hear a click. The click you hear
indicates the auto-spindle lock has engaged and locked
the spindle. With the spindle locked, you can easily install
or remove bits by turning the chuck sleeve with one hand.
The auto-spindle lock disengages when the motor starts
again.
UNLOCK
DRILLBIT
,_WARNING:
Make sure to insert drill bit
into
straight
chuck jaws. Do not insert drill bit into chuck jaws at
an angle and then tighten, as shown in Figure 4. This
could cause drill bit to be thrown from drill, resulting in
possible serious personal injury or damage to the
chuck.
CHUCKJAWS
LOCK
CHUCKSLEEVE
/
RIGHT
Fig. 3
INSTALLING
BITS
See Figure 3.
•
Lock the switch trigger by placing the direction of
rotation selector in center position. See Figure 10.
•
Open or close chuck jaws to a point where the open-
ing is slightly larger than the bit size you intend to use.
Also, raise the front of your drill slightly to keep the bit
from falling out of the chuck jaws.
•
Insert drill bit straight into chuck the full length of the
jaws as shown in Figure 3,
•
Tighten the chuck jaws on drill bit. To tighten, grasp
and hold the drill with one hand, while rotating the
chuck sleeve with your other hand,
Note: Rotate the chuck sleeve in the direction of the
arrow marked LOCK to tighten chuck jaws.
•
Do not use a wrench to tighten or loosen the chuck
jaws.
Fig. 4
REMOVING
BITS
See Figure 3.
•
Lock the switch trigger by placing the direction of
rotation selector in center position. See Figure 10.
•
Loosen the chuck jaws from drill bit.
•
To loosen, grasp and hold the drill with one hand,
while rotating chuck sleeve with your other hand.
Note: Rotate chuck sleeve in the direction of the arrow
marked UNLOCK to loosen the chuck jaws.
•
Do not use a wrench to tighten or loosen the chuck
jaws.
•
Remove drill bit from chuck jaws.
9
Advertisement
