Download
Share
Print this page
Craftsman 315.271221 Owner's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Cordless driver drill
  5. 315.271221
  6. Owner's manual
Craftsman 315.271221 Owner's Manual

Craftsman 315.271221 Owner's Manual

3/8 in., 12 volts professional cordless drill-driver variable speed / reversible
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual
iP
R
0
F E S
S
I
O N A
L i
3/8 in., 12 VOLTS PROFESSIONAL
CORDLESS DRILL-DRIVER
Variable Speed / Reversible
Model No.
315.271221
Save this manual
for
future reference
,_ CAUTION:
Read and
follow all Safety Rules and
Operating
Instructions
before
first use of this product.
Customer
Help Line:
1-800-932-3188
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
972000-818
1-01
• Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
®

Advertisement

loading

Related Manuals for Craftsman 315.271221

Summary of Contents for Craftsman 315.271221

  • Page 1 Safety Rules and Operating Instructions before • Assembly first use of this product. • Operation • Maintenance Customer Help Line: 1-800-932-3188 • Parts List ® Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-818 1-01...
  • Page 2 TABLE OF CONTENTS • General Safety Rules ..............................• Specific Safety Rules/Symbols ..........................• Features ..................................• Assembly ..................................• Operation ................................10-14 • Maintenance ................................• Accessories ................................. • Warranty ..................................• Exploded View And Repair Parts List ......................... •...
  • Page 3 Tool Use and Care • Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp • Use clamps or other practical way to secure and cutting edges are less likely to bind and are easier to support the workpiece to a stable platform.
  • Page 4 Important Safety Instructions For Charger c. That wire size is large enough for AC ampere rating of charger as specified below: • Save these instructions. This manual contains Cord Length (Feet) 100' Important safety and operating instructions battery charger part number _-11040 (981399-001 ). Cord Size (AWG) Following this rule will reduce the risk of electric Note: AWG = American Wire Gage...
  • Page 5 WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and •...
  • Page 6 WRIST STRAP KNOW YOUR DRILL-DRIVER See Figure I. A wrist strap is provided to reduce the chances of dropping Before attempting to use your drill-driver, familiarize your drill-driver. Place one hand through the wrist strap yourself with all operating features and safety when carrying tool.
  • Page 7 LEVEL GEARTRAIN(HI-LO) SCREWDRIVER BITS TWO SPEED KEYLESS CHUCK BITSTORAGE AREA CHARGER YELLOWLIGHT"ON" ANDRED LIGHT FLASHING INDICATES DEFECTIVEBATTERY PACK DIRECTIONOF ROTATION SELECTOR (FORWARD/REVERSE) TORQUE SWITCH ADJUSTMENT TRIGGER RING BATTERY PACK RED LIGHT"ON" INDICATESFAST CHARGING MODE GREEN LIGHT "ON" INDICATES FULLY CHARGED ANDSLOWCHARGING TOMAINTAIN BATTERYPACK WRISTSTRAP Fig.
  • Page 8 INSTALLINGBITS WARNING: Make sure to insert drill bit straight into See Figure 3. chuck jaws. Do not insert drill bit into chuck jaws at • Lock the switch trigger by placing the direction of an angle and then tighten, as shown in Figure 4. This rotation selector in center position.
  • Page 9 TO REMOVE BATTERY PACK FROM DRILL TO ATTACH BATTERY PACK TO DRILL See Figure 6. See Figure • Lock the switch trigger by placing the direction of Note: Battery pack is shipped in a low charge condition. rotation selector in center position. See Figure 10. Therefore, it must be charged prior to use.
  • Page 10 If after one hour red light is still flashing, this indicates a WARNING'. Always wear safety goggles or safety glasses with side shields when operating tools. defective battery pack and should be replaced. Failure to do so could result in objects being thrown Green light on indicates battery pack is fully charged into your eyes, resulting in possible serious injury.
  • Page 11 SWITCH LOCK SWITCH See Figure 10. See Figure 8. The switch trigger can be locked in the OFF position. This To turn your drill ON, depress theswitch trigger. To turn it feature can be used to prevent the possibility of accidental OFF, release the switch trigger.
  • Page 12 ADJUSTING RING KEYLESS CHUCK TO DECREASE See Figure 11. TORQUE A keyless chuck has been providedon your drill to allow for easy installation and removal ofbits. As the name implies, you can hand tighten or releasedrill bits in the chuck jaws. Arrows on the chuck indicatewhich direction to rotate the chuck sleeve in ordertoLOCK (tighten) or UNLOCK (release) the chuck jaws.Loosen the chuck sleeve by rotating it counterclockwisewith one hand.

  • Page 13: Top View

    DRILLING APPLICATIONS See Figure15. (Use drill-driver only for the purpose listed below) LEVEL • Drilling in wood. • Drilling in ceramics, plastics, fiberglass, a nd lami- nates. • Drilling in both hard and soft metals. • Using driving accessories, suchasdriving screws with screwdriver bits.

  • Page 14: Chuck Removal

    Insert hex key wrench in chuck and tighten chuck CHUCK REMOVAL jaws securely. Tap sharply with a mallet in a counter- See Figures 16, 17, and 18. clockwise direction. This will loosen chuck on the The chuck must be removed in order to use some spindle.

  • Page 15: Battery Pack Removal And Preparation For Recycling

    Do not abuse power tools. Abusive practices can WARNING: When servicing use onlyidentical Craftsman replacement parts. Use of anyother damage tool as well as workpiece. parts may create a hazard or cause productdamage. Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer.
  • Page 16 Thefollowing recommended accessories arecurrently available atSearsRetail S tores. • 17-Pc. P ower Screwdriver/Nutdriver Set and Case • 6-Pc.ExtraLength Magnite Power B itSet • 30-Pc. P ower S crewdriver/Nutdriver Setand Case • High Speed Bits (For Wood or Metal)..3/4 in. Max. WARNING: The use of attachments or accessories not listed might be hazardous.
  • Page 17 DRILL-DRIVER MODEL NO. 315.271221 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 3/8 in., 12 VOLTS PROFESSIONAL CORDLESS DRILL-DRIVER or when ordering repair parts.
  • Page 18 Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made _t,no matter who sold Jt_ 1-800-4-MY-HOME Anytime, day or night (1-800-469-4663) www.sears.com To bnng in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts &...