Demonstration Mode - Furuno SC-110 Operator's Manual

2. OPERATION
2.9.5

Demonstration mode

The demonstration mode provides simulated operation of the equipment.
1. Press the [MENU] key to open the menu.
2. Choose SYS SETUP and then press the [ENT] key.
3. Choose DEMO and then press the [ENT] key.
4. Choose ON or OFF as appropriate and then press the [ENT] key.
5. Press the [DISP] key to close the menu.
The indication SIM appears at the top of the screen when the demonstration
mode is active. Further, "S" appears on displays which show heading. When the
demonstration mode is first made active, SIMULATION MODE appears when
the power is turned on and it is erased when any key is pressed.
2-16