Furuno SC-110 Operator's Manual page 23

Flush mount "S"
Flush mount "S" kit
Name
Flush Mount Fixture
Wing Bolt
Wing Nut
Hex Bolt
Spring Washer
1. Make a cutout in the mounting location. The dimensions are 167(W) x 92(H)
mm.
2. Place the display unit in the cutout.
3. Fix the display unit to the two flush mount fixtures with hex bolts and spring
washers.
4. Screw the butterfly nut on the butterfly bolt.
5. Fix the display unit with the butterfly bolt and then tighten the butterfly nut.
Type: OP20-17, Code No.: 000-040-720)
Type Code No.
20-007-2401 100-183-190
M4X30 000-804-799
M4 000-863-306
M6X12 000-862-127
M6 000-864-260
Flush mount "S"
1. INSTALLATION
Qty
2
4
4
2
2
1-11