Lexmark MX710 Quick Reference page 6

> Paper Menu > Universal Setup > Units of Measure > select
a unit of measure
2
Touch Portrait Width or Portrait Height.
3 Select the width or height, and then touch Submit.
Loading the 250‑ or 550‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1
Pull out the tray completely.
Notes:
•
When loading folio‑, legal‑, or officio‑sized paper, lift the tray
slightly and pull it out.
• Avoid removing trays while a job prints or while Busy
appears on the display. Doing so may cause a jam.
2
Squeeze, and then slide the width guide to the correct position for
the size of the paper you are loading until it clicks into place.
1
2
Note: Use the paper size indicators on the bottom of the tray to
help position the guides.
6