Lexmark MX710 Quick Reference page 22

2
Lift the green handle, and then pull out the toner cartridge from
the printer.
3 Place the toner cartridge aside.
4
Lift the green handle, and then pull out the imaging unit from the
printer.
1
5
Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor
drum. Doing so may affect the print quality of future print jobs.
6
Pull the jammed paper gently to the right, and then remove it from
the printer.
Note: Make sure all paper fragments are removed.
Warning—Potential Damage: The jammed paper may be
covered with toner, which can stain garments and skin.
7 Install the imaging unit.
2
Note: Use the arrows on the side of the printer as a guide.
1 2
22
8
Insert the toner cartridge into the printer, and then push the green
handle back into place.
Notes:
• Align the arrows on the guides of the toner cartridge with
the arrows in the printer.
•
Make sure the cartridge is fully pushed in.