Control Panel; Operation Buttons & Leds; Setup Mode; Cleaning - Epson Stylus CX7300 Service Manual

EPSON Stylus CX7300/CX7400/DX7400/CX8300/CX8400/DX8400

1.6 Control Panel

1.6.1 Operation Buttons & LEDs
CX8300/CX8400/DX8400 (LCD-equipped model)
Table 1-16. CX8300/CX8400/DX8400 Buttons & LEDs
Button/LED
Power Turns the power ON/OFF.
Start Starts printing.
• Stops operation and displays the menu screen.
• Stops printing and ejects paper.
Stop/Clear
• Returns the print settings in the current mode to their default
and displays the Top screen. (Returns to the previous screen
during printing maintaining the current settings)
Goes to the Setup mode that provides maintenance menu (head
Setup
cleaning, head alignment, etc.) and various setting menu.
• Goes to the zoom setting screen for the selected image.
Display/Crop
• Changes the image preview layout on the LCD.
Menu Goes to the print setting menu screen.
Button
OK Accepts the changed settings
Back Cancels the previous operation.
Cross Key
Selects a menu item or a setting value.
(Up/Down/Left/Right)
+
Sets the number of copies.
-
Copy Goes to the stand alone Copy mode.
Memory Card Goes to the memory card direct print mode.
Goes to the special mode that provides Reprint/Restore Photos
Photo
function.
• Flashes at power ON/OFF.
• Flashes during some sequence is in progress.
Power (Green)
• Flashes when an fatal error occurs.
• Lights when the status is other than above. (i.e. when in
LED
stand-by / in setting operation using the control panel)
Card Access • Lights when a memory card is inserted.
(Green) • Flashes when a memory card is being identified or accessed.
PRODUCT DESCRIPTION
Function
Control Panel
LCD
Copy button
- button
Menu button
Setup button
Power LED
Power button
Note : The Card Access LED is provided near the memory card slot.
Figure 1-5. CX8300/CX8400/DX8400 Control Panel
Revision A
Memory Card button
Photo button
Cross key and OK button
+ button
Back button
Display/Crop button
Start button
Stop/Clear button
19