Turning On The Devices; Checking The Lan Cards - Fujitsu ETERNUS DX Disk User Manual

Chapter 6 Setting Up the VMware ESX Server
6.2 For VMware Infrastructure 3
6.2.1

Turning on the Devices

To turn on the connected devices, use the following procedures:
1
Turn on the LAN switch power.
2
Check that the LAN switch's Ready (or equivalent) LED is lit.
3
Turn on the ETERNUS DX Disk storage system.
4
Check that the Ready LED is lit on the ETERNUS DX Disk storage system.
5
Turn on the server.
6.2.2

Checking the LAN Cards

1
Select the [Configuration] tab on VMware Infrastructure Client.
2
Check the iSCSI SAN configuration Network Adapters.
"vmnic1" and "vmnic2" in the following example.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
31
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0