Setting Chap Authentication - Fujitsu ETERNUS DX Disk User Manual

Chapter 6 Setting Up the VMware ESX Server
6.2 For VMware Infrastructure 3
9
Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as
follows and click [Close].
10
If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-
tion process for each iSCSI port. (Repeat
6.2.5

Setting CHAP Authentication

For VMware ESX connections, the ETERNUS DX Disk storage system uses a one-way CHAP authentication to
authenticate the Software Initiator access.
Perform the following settings to enable CHAP authentication.
1
Select the [Configuration] tab on VMware Infrastructure Client and select [Storage Adapters].
2
Select the target iSCSI Software Adapter and click [Properties].
3
Select the [CHAP Authentication] tab and click [Configure].
4
Select the [Use the following CHAP credentials] radio button.
5
Set arbitrary user name during the CHAP authentication.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
Step 7 through Step
35
Copyright 2013 FUJITSU LIMITED
9.)
®
ESX
P3AM-3412-13ENZ0