Setting The Software Initiator - Fujitsu ETERNUS DX Disk User Manual

Chapter 6 Setting Up the VMware ESX Server
6.1 For VMware vSphere
7
Confirm that a virtual switch and VMkernel are set for each vmnic.
6.1.4

Setting the Software Initiator

Enable Software Initiator in VMware ESX.
6.1.4.1 For the ETERNUS DX Disk storage system
1
Select the [Configuration] tab on vSphere Client and click [Storage Adapters].
2
Select the target iSCSI Software Adapter and click [Properties...].
3
Click [Configure] on the [General] tab.
4
Select the [Status-Enabled] checkbox and click the [OK] button.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
23
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0