Download Print this page

Craftsman 919.679180 Owner's Manual page 6

5.0 horsepower 1800 psi 2.0 gpm high pressure washer
Hide thumbs Also See for 919.679180:

Advertisement

Tools Required
for Assembly
Adjustable wrench
Allen wrench
Remove
Pressure
Washer from Carton
• Open carton from the top. Locate and remove from
box the handle, gun, wand, videotape, and oil.
• Cut carton along doffed lines.
• Remove all carton inserts.
• Roll unitthroughopening in carton.
NOTE: The hose is located at the bottom of the box.
Preparing
the Pressure
Washer for First Use
Note: Included with your pressure washer is a video
cassette tape on how to prepare your unitfor
operation. It is recommended you view this tape
before performing the nextsteps.
1.
Insert handle onto frame.
• Insert knobs into the threaded
slot in front of the
frame handle and tighten by turning in a clock-
wise direction.
• Slide bolts into the slot in the side of the frame
handle and tighten the nut by turning
in a clock-
wise direction.
Insert bolt and
tighten lock nut,
Tighten knob in
_.___
clockwise
direction.
2. Using an adjustable wrench, remove nut from
bolt that attaches board to frame. Remove wood
plank from the frame of the unit. Discard bolt and
board.
,
Mount the rubber isolator to the frame. To
mount isolatorplace threaded end of bolt
throughthe washer.
• Next with washer on bolt place threaded end of
bolt throughthe largerhole in bottom of the
rubberisolator.
• Place threaded portion of bolt through the same
hole locationthe wood plank was mounted to
on the pressurewasher.
• Next place the tee nut over the threaded portion
of the bolt and usethe allen wrench provided to
tighten isolatorto the frame.
TEENtrr
r[
]
PRESSURE
_
-- EOL4TOR
WASHER
FRAME
W/i_HER -_.
BOLT
4, Connect wand extensionto gun. To tighten, turn
knob in clockwise direction. Hand tighten.
5. Remove tie wrap off of high pressure hose,
Unwind high pressure hose and attach the
threaded end to the gun. Tighten with adjustable
wrench.
6. Connect high pressure hose to outlet on
pressure washer and hand tighten firmly.
Connect chemical pickup hose to hose barb
on pump.
CHEMICAL--
HOSE
HIGH
PRESSURE
HOSE
NOTE: Always keep hose away from engine muffler.
6

Advertisement

loading