Your new tiller has been assembled at the
factory with exception of those parts left
unassembled for shipping purposes. To
ensure,safe and proper operation of your
tiller all parts and hardware you assemble
must be tightened securely. Use the'correct
tools as necessary to insure,proper tight-
ness
TOOLS
REQUIRED
FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes are listed.
(1) Utility knife ,
(1) Pair of pliers
(1) Screwdriver
(2) 1/2" wrenches
OPERATOR'S POSITION
When right or left hand is mentioned in
this manual, it means when you are in
the operating position (standing behind
tiller handles).
Left
Front
Right
Operator's Position
CONTENTS OF HARDWARE
PACK
iii!tililtlilililtltl
i2i'Hex'Bolts
5/16-18 x 3/4
. 5/16-18 x I
iiiiiUtiltlliiililtl
5/16-18 x 1-1/4
©
(6) Hex Nuts
5/16-18
(1) Bottle
Engine Oil
(4) Washers
3/8 x 7/8 x 14Ga.
(6) Lock
Washers
5/16
5