Maintenance Schedule; Checks Before Each Use; Lubrication Chart - Craftsman 917.292380 Owner's Manual

MAINTENANCE
A/_/o_ y
SCHEDULE
F,'L,.O.+ES
AS YOU COMPLETE _ SERVICE DATES REGULAR SERVICE
Check Engine Oil Level Ik / II_
Change Engine Oil b_'l, 2
Oil Pivot Points Ik/
InspectSparkAttester / Muffler V'
Inspect Air Screen
Clean or Replace Air Cleaner Cartridge _2
Clean Engine Cylinder Fins I_
Replace Spark Plug I/
1 - Change more often when operaUng under a heavy load or in high ambient temperatures.
2 - Set/ice more often 'M_en operating in dirty o_ dusty condltlon_
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover
items that have been subjected to opera-
tor abuse or negligence. To receive full
value from the warranty, operator must
maintain tiller as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tiller.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check tines and belt for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check tine operation.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See =LUBRICA-
TION CHART").
LUBRICATION CHART
** Engine
*Idler Arm
* SAE "30OR 10W30 MOTOR OIL
** REFER TO Maintenance "ENGINE" SEC-
TION.
11