Craftsman 536.797571 Owner's Manual page 9

OPERATION
KNOW YOUR EDGER/TRIMMER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR EDGER/
TRIMMER.
Compare the illustrations with your edger/trimmerto familiarize yoursolfwith the locationof various
controlsand adjustments. Save this manual for future reference.
:H LEVER
FUEL FILL
CAP
CONTROLROD
THROTTLE
CONTROL
LEVER_
MUFFLE
STARTER
HANDLE
INDEX LEVER
BLADE
PRIMER BUTTON
VIEW FROM LEFT OF ENGINE
BLADE
ADJUSTABLE
REAR WHEEL
OIL FILL CAP
FIG. 5
ADJUSTABLE
FRONT WHEEL
THROTTLE CONTROL - Used to control the engine
speed.
PRIMER BU'I-I'ON- Injectsfuel directlyintothe carbure-
tor manifoldfor faster starts.
STARTER HANDLE - The engine on this edger/trimmer
is equipped with an easy pull recoil starter.
CLUTCH LEVER - Used to start and stopthe blade and
controlthe depth of cut.
INDEX LEVER - Permits adjustment from the edging
(vertical) positionto trimming (horizontal) position. To
change position, pull the index lever and rotate the quill
assemblyto the desired angle or position.
BLADE GUARD - Used to prevent stones or other
materialfrom being thrown at the operator.
ADJUSTABLE REAR WHEEL . Right rear wheel is
adjustableIorcurb-hopping(to level edgedtrimmerwhen
edging along a curb).
ADJUSTABLE FRONT WHEEL- Front wheel is adjust-
able from side-to-sidefor balance. Also, can be adjusted
down for curb-hopplng (to level edger/trimmer when
edging along a curb).
9