Operator Panel Overview - Fujitsu SPARC Enterprise M4000 Installation Manual

Location
Number
59
60
61
62
* Contact your sales representative for tape drive unit options on M4000/M5000 servers.
A.3

Operator Panel Overview

When no network connection is available the operator panel is used to start or stop
the system. The operator panel displays three LED status indicators, a power switch,
and a security keyswitch. The panel is located on the front of the system, in the upper
right.
When the system is running the Power and XSCF Ready, LEDs (green) should be lit
and the Check LED (amber) should not be lit. If the Check LED is lit, search the
system logs to determine what is wrong.
The three LED status indicators on the operator panel provide the following:
General system status
■
System problem alerts
■
Location of the system fault
■
FIGURE A-3
Component
Memory Board (MEMB#3)
Memory board (MEMB#2)
Memory board (MEMB#1)
Memory board (MEMB#0)
shows the M4000 server operator panel.
Appendix A System Views A-9