Operator Panel Overview - Fujitsu SPARC Enterprise M4000 Overview Manual

FIGURE 1-5
2
Location
Number
1
2
1.2.3

Operator Panel Overview

The operator panel, which is identical for both midrange servers, is located on the
front of the server in the upper right corner. The operator panel is used for the
following tasks:
Displaying the server status
■
Storing server identification information
■
Storing user setting information
■
Turning on the power supply of all domains
■
Changing operational and maintenance mode by using the mode switch
■
See Section 1.3.6, "Operator Panel" on page 1-20
status indicators.
1-8 SPARC Enterprise M4000/M5000 Servers Overview Guide • December 2010
M5000 Server (Rear View)
2
Component
eXtended System Control Facility Unit (XSCFU)
I/O unit (IOU)
Each I/O unit supports one PCI-X slot (lowest slot) and four
PCIe slots (four upper slots)
1
for a description of the LEDs and
Maximum Number
per Server
1
2