Table of Contents
Advertisement
First Setup
Congratulations
for purchasing this monitor of high performance!
This monitor comes with the following accessories:
1.
LCD Monitor
2.
Owner's Manual
3.
Power Cord
4.
D-Sub Cable
5.
Audio Cable
Quick Installation
1.
Install / Remove the base
Place the display onto the base.
Align the display with the swivel on the base and plug the display into the
base.
Hold up the display and then
Install
Figure 1
2.
Connect video cable (D-Sub cable)
Make sure both monitor and computer are powered OFF. Connect the
video cable ( D-Sub cable) to the computer,then to the monitor.
3.
Connect audio cable
Connect one end of the audio cable to the back of the monitor and
connect the other end to the computer's audio out port.
4.
Connect power cord
Connect the power cord to a properly grounded AC outlet,then to the
monitor
5.
Power-ON computer and monitor
Power-ON the computer,then Power-ON the monitor
6.
Windows users: Setting the Timing Mode(Resolution and Refresh
Rate)
snap
the base by hand to remove it.
Remove
Installing and Removing the Base
2
Advertisement
Table of Contents
