Adjusting The Volume And Selecting Output Channels; Changing The Playback Position - Canon XF300 Instruction Manual

Playing Back, Searching and Managing Clips

Adjusting the volume and selecting output channels

Drag the volume slider to adjust the playback volume. You can click
( ). Click on the audio channel selection buttons (
will be played back.
18

Changing the playback position

You can change the playback position during playback or in playback pause mode in the following
ways.
Playback position slider
* Only available after clicking on the playback position slider in the preview panel or during fullscreen playback.
Click to mute the audio
Volume slider
Audio channel selection
Mouse operation Keyboard shortcut*
Shot
Shot
Event
Event
CH1 or
Jump to the previous/next shot mark
Shot mark
Playback position slider
Event mark
Skip to the last frame
Next frame
Previous frame
Skip to the first frame
Jump to the previous/next event mark
Home Skip to the first frame of the clip.
End Skip to the last frame of the clip.
arrow Go back one frame.
arrow Advance one frame.
Shift + Jump to the previous shot mark (0 26) in the clip.
Shift + Jump to the next shot mark in the clip.
Ctrl + Jump to the previous event mark (0 26) in the clip.
Ctrl + Jump to the next event mark in the clip.
— Drag it to bring the playback position to the desired
frame.
— Click to jump directly to the selected shot mark.
— Click to jump directly to the selected event mark.
to temporarily mute the sound
CH2) to select the audio channel that
Action