Hotpoint RGB540SEP - 30 in. Gas Range Owner's Manual page 33

Installation Instructions
[] LIGHT THE PILOTS (cont.)
[] Check Ignition of Surface Burners
Operation of all cooktop and oven burners should
be checked after pilots have been lighted (on
some models)and the range
and gas supply lines have been carefully checked
for leaks.
Standing Pilot Models
Select a top burner knob and simultaneously
push in and turn to HI position. The burner should
light within u few seconds. Try each burner in
succession until all burners have been checked.
Electric Ignition Models
Select u top burner knob and simultaneously push
in and turn to LITE position. You will hear a clicking
sound indicating proper operation of the spark
module. Once the air has been purged from the
supply lines, burners should light within 4 seconds.
After burner lights, rotate knob out of the LITE
position. Try each burner in succession until all
burners have been checked.
Ouality of Flames
The combustion quality of burner flames needs to
be determined visually.
(A) Yellow flames-Call
for service
(B) Yellow tips on
outer cones--Normal
for LP gas
(C} Soft blue
flames--Normal for
natural gas
If burner flames look like (A), call for service.
Normal burner flames should look like (B) or (C),
depending on the type of gas you use.
With LP gas, some yellow tipping on outer cones
is normal.
[] Replace Oven Parts
After all adjustments are made, replace the
broiler drawer, oven bottom, racks and oven
door.
33