Restore Defaults - Polycom SoundStation2 User Manual And Administrator Manual

►White Noise is a signal
whose energy is distributed
uniformly among all frequen-
cies within a band of interest,
which for the SoundStation2™

Restore Defaults

Restoring the defaults will irretrievably remove all
settings and data that have been entered since the
SoundStation2™ was first installed.
1. Press the Menu button, choose
Admin Setup and press the
Select button, enter passcode (if
required) and press the
soft key. Choose Diagnostics
using the Scrolling buttons, and
press the Select button.
2. Choose Restore Defaults using
the Scrolling buttons, and press
the Select button. Press the
soft key if you wish to restore
defaults or the
or the Exit button to return to the
Diagnostics submenu.
ENTER
OK
soft key
CANCEL
SoundStation2™ Administrator Guide - 30
is approximately from 300 to
3,400 Hertz.
3. Press the Select button to acti-
vate the signal.
►Phone Book entries and Speed
Dial numbers are not lost when
restoring all defaults.