Connections; Preparing For Performance - Zoom 2100 Operation Manual

Connect the volume-adjustable
headphone jack of a sound
source, such as a CD player, to
the AUX IN jack using a stereo
mini plug. The signal input from
the AUX IN jack will be mixed with
the effected guitar signal and
routed to the OUTPUT jack. You
can also record input signals from
the AUX IN jack on the 2100 using
the Sampler function.
CD player
INPUT
AUX IN
Guitar

Preparing for performance

Follow the steps below to turn on the power to the equipment and adjust the volume level.
Make sure that the power to the amplifier is
turned off, and lower its volume knob to the
minimum level.
Turn on the power to the 2100.
Insert the AC adapter into the AC outlet. The
power to the 2100 is turned on automatically.

Connections

Use a monaural cable to connect one amplifier to the
OUTPUT jack. Use a stereo Y-cable to connect two
amplifiers to the OUTPUT jack. If you use two
amplifiers, you will get a great sense of spaciousness
when you use stereo effects. You can also connect
headphones to the OUTPUT jack.
OUTPUT
ZOOM CORPORATION
MADE IN JAPAN
[PHONES] MODEL
Foot pedal FP01or FP02
Headphone
Amplifier
CONTROL IN
Connect an optional foot
pedal FP01or FP02 to
the CONTROL IN jack to
control the RTM function
with the foot pedal.
Turn on the power to the amplifier.
While playing the instrument, adjust the volume of
the instrument and the amplifier to the optimum
level.
DC9V
300mA
AC adapter
3