Reduced spray or no spray.
Possible Causes
Bladder may be empty.
SmartMix
The filter may be clogged.
Tanks may not be seated properly.
Pump may have lost prime.
The Pump Belt may be broken.
Troubleshooting
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from
outlet before servicing.
®
Bottle may be empty.
Lift Here
Insert
Screwdriver
Blade Here
Remedies
Refill tank with hot tap water.
Fill with BISSELL chemical.
Clean out filter, page 14.
Turn power OFF; remove and reseat tanks.
Turn power OFF; after 1 minute turn ON and
depress trigger.
Turn the machine OFF and unplug from the outlet.
To check if a Pump Belt has broken, you will need
a flat head
screwdriver. Insert the blade end
into the lower slot of the Belt Access door to release
the lower snap. If necessary, insert the blade end
into the upper slot to release the upper snap.
Examine for belt breakage. You should be able to
see the Pump Belt looped around the motor shaft.
If it is broken or missing, please refer to
Part Numbers and Descriptions on page 17
before calling Customer Service.
Complete installation instructions will accompany
the replacement belt.
15