Atex Safety Information; Symbols - Fluke 1551A EX Calibration Manual

If the Product overheats or is exposed to sudden physical shock, examine it for damage that
can cause a safety risk. If possible, compare the displayed temperature to a known reference
before Product use. If not sure, send the Product to Fluke Corporation. Refer to "How to
Contact Fluke".
Substitution of components will impair suitability for hazardous locations.

ATEX Safety Information

This manual contains data and safety regulations that must be followed for safe, reliable
use of the Product in hazardous areas under the detailed conditions. If you do not follow
these instructions, personal injury or Product damage can occur. Violation of applicable
legislation can also occur. Read the full manual before you use the Product. To make sure
of safe Product operation, fully follow all instructions and warnings in the manual. If you
are not sure (due to translation and/or printing errors), refer to the English manual.
An "Ex-hazardous area," as used in this manual, refers to an area made hazardous by the
possible presence of flammable or explosive vapors. These areas are also referred to as
"hazardous locations."
Manufactured by Martel Electronics, Inc.,
3 Corporate Park Dr.
Derry, NH, USA

Symbols

International symbols used on the Product and in this manual are explained in Table 1.
Symbol
J
Earth ground
Risk of Danger. Important information.
W
See Manual.
Do not dispose of this product as
unsorted municipal waste. Go to
~
Fluke's website for recycling
information.
P
Conforms to relevant European Union directives.
Ex ib IIB T4 Gb (–10 °C
ITS10ATEX27114X
Ex ib IIB T4 Gb
II 2 G IECEx ITS10.0049
Table 1. Symbols
Meaning
≤ Ta ≤ +50 °C)
0344
Symbol
M
Battery
Hazardous Voltage
X
Conforms to ATEX requirements
(
Stik Thermometer
Safety Information
gjo006.eps
Meaning
3