Tips For Network Setup - LG PA75U Owner's Manual

38
ENTERTAINMENT
Tips for Network Setup
Modem reconfiguration may cause
y y
network connection problems. If it
does, turn off the modem and discon-
nect it from the projector; then turn on
the modem again. It will be working
normally.
LG Electronics is not responsible for
y y
any Internet connection problems, or
any failure, error or malfunction due
to your Internet connection.
The network connection may not be
y y
working properly because of the Inter-
net Service Provider (ISP).
DSL service requires a DSL modem,
y y
and cable service requires a cable
modem. Internet connections may be
limited due to an agreement with an
Internet service provider (ISP), and
the projector might not connect to a
network. (When only one device is
allowed per line and a PC is already
connected, other devices are not
available for use.)
The wireless network may be affected
y y
by interference from a device that
uses 2.4 GHz frequency, such as a
wireless telephone, Bluetooth device
or microwave. Interference may also
be caused by a device that uses 5
GHz frequency such as Wi-Fi de-
vices.
The wireless network service may run
y y
slowly depending on the surrounding
wireless environment.
Some devices may have a network
y y
traffic jam if any local home networks
are turned on.
To connect to a wireless router, a
y y
router that supports wireless connec-
tion is necessary; the wireless con-
nection function of the corresponding
router must also be activated. Ask
the router manufacturer whether the
router supports wireless connection.
To connect to a wireless router, verify
y y
the SSID and security settings of
the wireless router. Please refer to
the user guide of the corresponding
router regarding SSID and security
settings of the wireless router.
The projector may not work properly if
y y
network devices (wire/wireless router
or hub, etc.) are incorrectly set up. Be
sure to install the devices correctly by
referring to their user guides before
configuring the network connection.
When Ad-hoc is used, it may not be
y y
able to connect depending on the
device (for example, laptop) that is
connected.
The connection method may vary
y y
according to the manufacturer of the
wireless router.