Troubleshooting; Scan To Network Troubleshooting; The Application Icon Is Missing From The Home Screen; An Application Error Has Occurred - Lexmark MX6500e 6500e Administrator's Manual

Troubleshooting

Troubleshooting

Scan to Network troubleshooting

The application icon is missing from the home screen

For the application to work, at least one valid destination must be enabled. If no valid destinations are available, then
the application icon will disappear from the home screen.
To display the application icon when no destinations are available:
1
From the application configuration settings, under Home Screen Button, select Always show button under Display
Option.
2
Click Apply.

An application error has occurred

Try one or more of the following:
C
HECK THE SYSTEM LOG
1
Obtain the scanner IP address:
•
From the scanner home screen
• From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
2
Open a Web browser, and then type the scanner IP address in the address field.
The Embedded Web Server appears.
3
From the navigation menu on the left, click Settings > Apps > Apps Management.
4
Click the System tab > Log.
5
From the Filter menu, select an application status.
6
From the application menu, select an application, and then click Submit.
A
DJUST THE SCAN SETTINGS
In the application configuration settings, select a lower scan resolution. You can select Off or a lower resolution from
the Scan Color menu.
C
ONTACT YOUR SOLUTIONS PROVIDER
If you still cannot isolate the problem, then contact your solutions provider for additional help.
14