Lexmark MX6500e 6500e Setup Manual page 31

IPDS Printer and Host Setup Guide Printer and Host Timeout Values
MVS host and Printer IPDS Timeout Values
Printer
IPDS Timeout
Host Controlled
Host Controlled
15 sec to 10 Min
15 sec to 10 Min
Note 1: The number of seconds should be greater than or equal to 15 seconds.
Note 2: This timer combination is not recommended. The printer will remain busy after the IPDS job has
completed. Jobs from other IPDS sessions and non-IPDS jobs waiting on other ports will not print.
Note 3: This timer combination is not recommended. If used, the difference between the two timers should be
a minimum of 30 seconds.
Note 4: A printer IPDS Timeout value of 15 sec or 30 sec is recommended. This allows 15 or 30 seconds for
the host to send another job before the printer times out and starts printing jobs waiting on other ports.
STARTUP PROC
Disconnect Interval (DISCINTV)
Specific Number of Seconds
0
Specific Number of Seconds
0
STARTUP PROC
Valid Port Number (PORTNO)
5001, 9600
None
5001, 9600
5001, 9600
Note
1
2
3
4
31