Advertisement
If you have not used this toy before, and are assembling it for
first-time use in Stage 3, start with Step 2.
To change from Stage 2 to Stage 3
1
• Turn the threaded knobs counter-clockwise and detach the leg
assemblies from the keyboard.
• Press the star buttons and remove the two
supports from the legs. Now, proceed to step 2.
Star Button
Leg
Large Slot
2
• While pressing the star buttons on a support, fit the end of the support
into the large slot in one of the legs, as shown. Push the support until it
"snaps" into place.
• Repeat this procedure to attach the other support to the remaining leg.
Leg Assembly
3
• Position the keyboard so it faces up.
• Fit a leg assembly to the side of the keyboard, as shown.
• Turn the knob clockwise to secure the leg assembly to the keyboard.
Make sure the knob is fully tightened.
• Repeat this procedure to attach the other leg assembly to the keyboard.
Hanger
4
• Rotate the hangers up and "snap" them into place.
• Attach the toys to the hangers and tabs as shown.
Stage 3 - Stand & Play Piano
Support
Knob
Leg Assembly
Tab
Stage Switch
• Slide the stage switch to
• Slide the mode switch to
real piano, as stars light up.
• Slide the mode switch to
like they're sung by a children's chorus.
• Locate the volume switch on the bottom of the keyboard. Adjust volume
to high
; or low
, for your child's comfort.
Hint: If your child is not actively playing with this toy, it turns off
automatically (sleep mode).
• Be sure to slide the stage switch to the off O position when not in use.
6
Mode Switch
for use with standing toddlers.
. Press the keys to play note by note like a
. Press the keys to hear notes that sound
Advertisement
