Advertisement
Star Button
Leg
1
Large Slot
• While pressing the star buttons on a support, fit the end of the support
into the large slot in one of the legs, as shown. Push the support until it
"snaps" into place.
• Repeat this procedure to attach the other support to the remaining leg.
Leg Assembly
2
• Position the keyboard so it faces you.
• Fit a leg assembly to the side of the keyboard, as shown.
• Turn the knob clockwise to secure the leg assembly to the keyboard.
Make sure the knob is fully tightened.
• Repeat this procedure to attach the other leg assembly to the keyboard.
3
• Grasp each hanger under the keyboard and pull it down so it
swings freely.
• Attach the toys to the hangers, as shown.
Stage 1 - Lay & Play Gym
Support
Knob
Leg Assembly
Hanger
Stage Switch
• Slide the stage switch to
• Slide the mode switch to
a single song plays with "singing" light-up stars.
• Slide the mode switch to
music plays for about 10 minutes with "singing" light-up stars.
• Locate the volume switch on the bottom of the keyboard. Adjust volume
to high
; or low
, for your child's comfort.
Hint: If your child is not actively playing with this toy, it turns off
automatically (sleep mode).
• Be sure to slide the stage switch to the off O position when not in use.
4
Mode Switch
for use with babies lying down.
for shorter play. When baby bats the toys,
for longer play. When baby bats the toys, the
Advertisement
