Advertisement
If you have not used this toy before, and are assembling it for
first-time use in Stage 2, start with Step 2.
To change from Stage 1 to Stage 2
1
• Turn the threaded knobs counter-clockwise and detach
the leg assemblies from the keyboard.
• Press the star buttons and remove the two
supports from the legs. Now, proceed to step 2.
Leg
Large Slot
2
• While pressing the star buttons on a support, fit the end of the support
into the large slot in one of the legs, as shown. The support should
"snap" in place.
• Repeat this procedure to attach the other support to the remaining leg.
Leg Assembly
3
• Position the keyboard so it faces up.
• Fit a leg assembly to the side of the keyboard, as shown.
• Turn the knob clockwise to secure the leg assembly to the keyboard.
Make sure the knob is fully tightened.
• Repeat this procedure to attach the other leg assembly to the keyboard.
4
Hanger
• Rotate the hangers up and "snap" them into place.
• Attach the toys to the hangers and tabs as shown.
Stage 2 - Sit & Play
Support
Star Button
Knob
Leg Assembly
Tab
Stage Switch
• Slide the stage switch to
• Slide the mode switch to
plays with twinkling lights. With each press of a key, the song continues
building, a little at a time.
• Slide the mode switch to
or chords play as twinkling lights follow along.
Hint: If your child is not actively playing with this toy, it turns off
automatically (sleep mode).
• Be sure to slide the stage switch to the off O position when not in use.
5
Mode Switch
for use with babies sitting up.
. When baby presses a key, part of a song
. When baby presses a key, musical scales
Advertisement
