Advertisement
INSTALL
MULCHER
PLATE
(If previously
removed)
• Raise and hold deflector shield in
upright position.
• Place front of mulcher plate over front
of mower deck opening and slide into
place, as shown.
• Hook front latch into hole on front of
mower deck.
• Hook rear latch into hole on back of
mower deck.
ACAUTION:
Do not remove deflector
shield from mower. Raise and hold
shield when attaching mulcher plate and
allow it to rest on plate while in opera-
tion.
Mulcher
Defh
Plate
Shield
Latch
Hooks
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store
in a safe place. Your mower is now ready
for discharging or installation of optional
grass catcher accessory.
NOTE:
It is not necessary to change
blades. The mulcher blades are de-
signed for discharging and bagging also.
CHECK TIRE PRESSURE
The tires on your tractor were overin-
flared at the factory for shipping pur-
poses. Correct tire pressure is important
for best cutting performance.
• Reduce tire pressure to PSI shown in
"PRODUCT
SPECIFICATIONS"
section of this manual.
CHECKDECKLEVELNESS
For best cutting results, mower housing
should be propedy leveled.
See "TO
LEVEL MOWER
HOUSING"
in the
Service and Adjustments section of this
manual.
CHECK FOR PROPER POSITION
OF ALL BELTS
See the figures that are shown tor
replacing motion and mower blade drive
Q
belts in the Service and Adjustments
section of this manual. Verify that the
belts are routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your
tractor, check to see that the brake is
properly adjusted.
See "TO ADJUST
BRAKE"
in the Service and Adjustments
section of this manual.
I/ CHECKLIST
Before you operate and enjoy your new
tractor, we wish to assure that you re-
ceive the best performance
and satisfac-
tion from this quality product.
Please review the following
checklist:
,/ All assembly
instructions
have been
completed.
,/No
remaining
loose parts in carton.
,/Battery
is properly prepared and
charged.
(Minimum 1 hour at 6
amps).
,/Seat
is adjusted comfortably and tight-
ened securely.
#' All tires are properly inflated.
(For
shipping purposes, the tires were
overinflated at the factory).
•/ Be sure mower deck is properly lev-
eled side-to-side/front-to-rear
for best
cutting results. (Tires must be properly
inflated for leveling).
,/Check
mower and drive belts. Be sure
they are muted properly around pul-
leys and inside all belt keepers.
•/ Check wiring. See that all connections
are still secure and wires are properly
clamped.
,/Before
driving tractor, be sure free-
wheel control is in drive position.
While learning how to use your tractor,
pay extra attention to the following
im-
portant items:
,/Engine
oil is at proper level.
,/Fuel
tank is filled with fresh, clean,
regular unleaded gasoline.
,/Become
familiar with all controls - their
location and function.
Operate them
before you start the engine.
•/ Be sure brake system is in safe oper-
ating condition.
/ It is important to purge the transmis-
sion before operating your tractor for
the first time. Follow proper starting
and transmission purging instructions
(See "TO START ENGINE" and
"PURGE TRANSMISSION"
in the Op-
eration section of this manual).
Advertisement
