Download Print this page

Craftsman 358.794741 Operator's Manual page 8

25cc/1.5 cu.in. 2-cycle 200 mph/430 cfm gasoline powered blower/vac
Hide thumbs Also See for 358.794741:

Advertisement

Available languages

Available languages

BLOWER
US
I
Retainer
SHOULDER
STRAP ATTACHMENT
(optional
accessory
#71-85783)
1. Pass the shoulder strap over your
head and onto your left shoulder.
2. Snap the hook onto the retainer
(see following
illustration).
VACUUM USE
Retainer
KNOW YOUR BLOWER
READ THIS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations with your unit to familiarize yourself with the location
of the various controls and adjustments.
Save this manual for future reference.
Upper Vacuum Tube
Elbow Tube
Starter
Rop_
Fuel Mix
Fill Cap _i_
J
Primer
Bulb
Lower Vacuum Tube
-_.
/
/
STOP
"---_-J"
Throttle
Switch
Trigger
Spark
Plug
Upper Blower Tube
Handle
Lower Blower Tube
High-Speed
Nozzle
STOP SWITCH
The STOP switch is used to stop the
engine. To stop the engine, push and
hold the STOP switch in the STOP posi-
tion until the engine stops.
THROTTLE
TRIGGER
The THRO]q-LE TRIGGER is used to se-
lect the desired engine speed.
PRIMER BULB
The PRIMER BULB removes
air from
the carburetor
and fuel lines and fills
them with fuel. This allows you to start
the engine with fewer pulls on the
starter rope. Activate
primer bulb by
pressing
it and allowing
it to return to
its original position.
CHOKE LEVER
The CHOKE helps to supply fuel to the
engine to aid in cold starting. Activate
the choke by moving the choke lever to
the FULL CHOKE position. After engine
attempts to start, move the choke lever
to the HALF CHOKE position. Once en-
gine starts, move choke lever to the
RUN position.
-8-

Advertisement

loading