Advertisement
SECTION
5" ASSEMBLY
INSTRUCTIONS
IMPORTANT:
After
assembly,
service
engine
with gasoline, and check oil level as instructed in the
separate engine manual packed with your unit.
NOTE:
References to right or left side of the snow
thrower are determined
from behind the unit in the
operating position.
UNPACKING
• Remove staples or break glue on the top flaps
of
the
carton.
Remove
any
loose
parts
included with unit (i.e., operator's manual,
etc.).
• Cut corner's and lay end of carton down flat.
Remove packing material.
• Roll
unit
out
of
carton.
Check
carton
thoroughly for loose parts before discarding.
TOOLS REQUIRED FOR ASSEMBLY
• Two adjustable wrenches
LOOSE PARTS IN CARTON
See Figure 3
A
B
C
D
E
F
G
H
J
(2)
Handles (Right and Left)
(t)
Pivot Rod
(1)
Cover Tube
(2)
Clutch Grips (Right and Left)
(1)
Handle Panel
(1)
Speed Selector Plate
(1)
Shift Lever
(1)
Chute Directional Control Assembly
(1)
Chute Assembly
A
E
Figure 3
6
Advertisement
