Operation; Product View And Parts Identification - Craftsman 358.350200 Instruction Manual

KNOW YOUR S AW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence,
Chain Adjustment Front Hand Guard
/Ba'T%'/ R F
Muffler _"_]
Chain "_ _L_ L
FilI Cap
Starter Housing
Front Handle
Starter Rope
Fuel Mix Fill Cap
Throttle
Lock-out
Rear
Handle
Cylinder Cover
Adjusting
Direction
of Chain
Travel
Throttle
Chain Brake
Choke/Fast
Idle Lever
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop
the engine,
THROTTLE TRIGGER
The THROTTLE TRIGGER controls en-
gine speed.
THROTTLE LOCK-OUT
The THROTTLE LOCK-OUT must be
pressed before you can squeeze the
throttle trigger. This feature prevents
you from accidentally squeezing the
trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle speed are set
by pulling the CHOKE/FAST iDLE LEVER
out fully for cold or for refueled starting.
The choke provides additional fuel to
the engine during cold starting.
Guide Bar
Chain Brake Nuts
CHAIN BRAKE
The CHAIN BRAKE is a device de-
signed to stop the chain if kickback oc-
curs. The chain brake activates auto-
matically in the event of kickback, The
chain brake activates manually if the
front hand guard is pushed forward.
The chain brake is disengaged by pull-
ing the front hand guard back toward
the front handle as far as possible,
CHAIN TENSION
tt is normal for a new chain to stretch
during first 30 minutes of operation.
You should check your chain tension
frequentIy. See CHAIN TENSION in the
SERVICE AND ADJUSTMENTS section,
dDbWARNING: MuffIer is very hot
during and after use. Do not touch the
muffler or allow combustible material
such as dry grass or fuel to do so,