Using A Splitter With The 20-Port And 10-Port Mid-Span Power Hubs; Bl-89420Ent, Bl-89520Ent, Bl-89620Ent, Or Bl-89720Ent Power Hub With Splitter - Enterasys BL-89420ENT User Manual

Using a Splitter with the 20-Port and 10-Port Mid-Span Power Hubs

Using a Splitter with the 20-Port and 10-Port
Mid-Span Power Hubs
Some products require a BL-89705ENT or BL-89712ENT splitter (sold separately) that
splits power and data into separate cables, and converts the ~48 VDC into 5.0 VDC or
12.0 VDC for input power. To ensure compliance with class A requirements, use category
5, 5e, or 6 shielded twisted pair straight-through cables.
Figure 2-3
operating with a splitter.
Figure 2-3
2-4 Installation and Connection
shows a typical configuration for the Enterasys 20-port Mid-Span Power Hub
BL-89420ENT, BL-89520ENT, BL-89620ENT, or BL-89720ENT Power
Hub with Splitter