Assigning Vlan Membership To Ports - Enterasys 700 User Manual

•
For more information on 802.1Q port operational modes, see
on
Discard
This field displays the port's current frame discard format (discardTagged,
discardUntagged, or noDiscard).
The VLAN ID, Port Operational Mode, and Port Discard fields, below the list
box, allow you to configure your ports as follows:
VLAN ID
This field allows you to associate a selected port with an existing VLAN. See
Assigning VLAN Membership to
this operation.
Port Operational Mode
This field allows you to assign a mode of operation to a selected port. See
Port Operational
Port Discard
This field allows you to specify the frame discard format (discardTagged,
discardUntagged, or noDiscard) for a selected port. See
Discard

Assigning VLAN Membership to Ports

To assign a port on your 802.1Q switch to any of your defined VLANs:
1. In the list box, click to select a port that you wish to assign to a VLAN. The
2. In the VLAN ID field, click to select the VLAN ID of the VLAN to which you
3. Click the Apply button. The new VLAN assignment will be reflected in the
If you assign a port to a VLAN that is in a Disabled state, the VLAN will automatically
be Enabled once the port assignment operation has been completed.
NOTE
Managing the Module
Hybrid mode, which allows a port to receive and transmit both tagged and
untagged frames. In this mode, the port will be a member of its statically
assigned VLAN, as well as any dynamically learned VLANs. Hybrid mode is
enabled by default.
page 2-63.
Modes, on
Formats, on page
port's current VLAN configuration information, including its VLAN ID, will be
displayed in the fields below the list box.
wish to assign the selected port.
VLAN Port Config window's list box for the selected port.
The MultiSwitch 700 Device View
Ports, on page
page 2-70, for details on using this field.
2-70, for details on using this field.
802.1Q Port
2-69, for details on performing
Setting Port Frame
Types,
Setting
2-69