Connecting To A Vt Series Terminal; Connecting An Ibm Pc Or Compatible - Enterasys 2G4072-52 Installation Manual

Connecting to the COM Port for Local Management
5. When these parameters are set, the Local Management password screen will display.
Refer to the appropriate Enterasys Matrix N Standalone Series Configuration Guide for
further information.
Figure 3-12
1 UTP cable with RJ45 connectors
2 RJ45 COM port

Connecting to a VT Series Terminal

To connect a VT Series terminal to a Enterasys Matrix N SA 2G4072‐52 COM port
(Figure
adapter. Proceed as follows:
1. Connect the RJ45 connector at one end of the cable to the COM port on the
Enterasys Networks device.
2. Plug the RJ45 connector at the other end of the cable into the RJ45‐to‐DB25 female
adapter.
3. Connect the RJ45‐to‐DB25 adapter to the port labeled COMM on the VT terminal.
3-14 Installation

Connecting an IBM PC or Compatible

Ã
3‐13), use a UTP cable with RJ45 connectors and an optional RJ45‐to‐DB25 female
 3 RJ45-to-DB9 PC adapter
4 IBM PC or compatible device
Á