Maintenance; Recommended Maintenance Schedule(S) - Exmark TURF TRACER Operator's Manual

Hide thumbs Also See for TURF TRACER:
Table of Contents

Advertisement

Maintenance

Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
WARNING
While maintenance or adjustments are being
made, someone could start the engine.
Accidental starting of the engine could seriously
injure you or other bystanders.
Remove the key from the ignition switch, engage
parking brake, and pull the wire(s) off the spark
plug(s) before you do any maintenance. Also
push the wire(s) aside so it does not accidentally
contact the spark plug(s).

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 250 hours
Before each use or daily
Every 40 hours
Every 80 hours
Every 100 hours
Every 160 hours
Every 250 hours
Every 500 hours
Monthly
Yearly
Maintenance Procedure
• Change the engine oil.
• Change the hydraulic filter.
• Check the engine oil level.
• Check the mower blades.
• Check the safety interlock system.
• Check for loose hardware.
• Clean the grass build-up from under the deck.
• Check the hydraulic oil level.
• Check the tire pressures.
• Check the condition of the belts.
• Grease the hydro control arm support bushings.
• Remove engine shrouds and clean cooling fins.
• Change the engine oil. (May need more often under severe conditions.)
• Check the spark plugs.
• Replace the primary air cleaner element — check secondary air cleaner element; replace if
dirty. (May need more often under severe conditions. See the Engine manual for additional
information.)
• Replace the secondary air cleaner element. (May need more often under severe conditions.
See the Engine manual for additional information.)
• Change the hydraulic filter (Every 250 hours/yearly if using Mobil 1 15W50)
• Check the battery charge.
• Grease the front caster wheel hubs.
• Grease front caster pivots.
• Grease the idler pivots (Mower Deck).
• Grease the idler pivot (Pump Drive).
• Lubricate the caster wheel hubs.
WARNING
The engine can become very hot. Touching a hot
engine can cause severe burns.
Allow the engine to cool completely before
service or making repairs around the engine area.
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents