Figure 3-17
Installing External Flaps for 4.9 to 5.9 GHz Sector Panel Antenna
Table 3-14 RoamAbout 4.9 to 5.9 GHz Sector Panel External Flaps Components
#
Component
1
External flap
2
Screw and washer
To attach the external flaps to the antenna, perform the following steps:
1.
Place the side of a flap with screw holes flat against one of the sides of the antenna so that the
side of the flap that sits perpendicular to the antenna faces the front of the antenna.
2.
Attach the flap to the antenna using a screw and washer in each of the four screw holes.
3.
Repeat steps 1 and 2 to attach a flap to the other side of the antenna.
RoamAbout Antenna Site Preparation and Installation Guide 3-31
Mounting the Antenna