Sens-Up - EverFocus ED560 Operation Instruction Manual

C H A P T E R 3 O S D
OFF: No reduction in noise level.
LOW: Little reduction in noise level with nearly no ghost image. Default value is LOW.
MIDDLE: Just enough reduction in noise levels without causing much ghost imaging.
HIGH: Huge reduction in noise level, which may cause much ghost imaging.
NOTE:
When AGC is turned off, DNR will be disabled.

3.1.7 SENS-UP

SENS UP is used to keep a brilliant, vivid screen image by automatically detecting changes in the level
of light under low light level conditions. The value is from x2 ~x128.
1. Please direct the arrow to point to "SENS UP" on the SETUP menu by turning the mini-joystick
UP ( ) or DOWN ( ).
2. Select the mode you would like to operate by turning the mini-joystick LEFT ( ) or RIGHT ( ).
AUTO: Low light level auto mode. Default value is AUTO (Up to X 10).
SETUP
LENS DC <┘
SHUTTER ___
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
> SENS-UP AUTO <┘
SPECIAL <┘
EXIT
OFF: The function is disabled.
3. Press the mini-joystick when you finish all the settings.
M E N U A N D C O N F I G U R A T I O N
> AUTO
35
LIMIT
X 10